Self Powered Generator

What is a self-powered generator?

Self-powered generators basically have 2 gates as input and output. The voltage that appears at the input or output. On the other hand, common generators run on fuel that only has an output. Because of its principle of operation is said to have the conversion of kinetic energy into electrical energy.

A self-powered generator will have an input voltage and an output voltage. If the power at the output is greater than the power supplied at the input, it can be extracted back to the input. At that time, this generator is also called the Overunity generator.

Block diagram of self-powered generator - Overunity - Free energy

The supply of voltage back to the input needs to satisfy 2 factors:

1. The voltage is correct to the rated voltage of the input. For example, if you have a free power transformer, the input only requires a square pulse voltage with a threshold of 5V. Then you need a square pulse generator circuit 5V voltage is taken from the output.
2. The output voltage is passed through an electronic circuit, or a special winding construction, to avoid Back EMF harmful to the system. With a free power transformer, a unique way of creating a steel core turns Back EMF (Lenz's force) from harmful to beneficial. The use of Diodes is also very common to turn the harmful effect of back EMF.

An example of a self-powered generator:

The free power transformer with premium version is self-powered through the battery charged from the output. That is, at the output, extract to a rectifier bridge diode circuit, then charge the battery. From the battery voltage will be supplied to a pulse generator circuit. Use this pulse to control the transformer.

Simple free power transformer version without self-powered mode. You can use it to reduce your electricity bill by more than 75% with the following version:

In the picture above is the version that does not offer self-powered mode. If you want to be self-powered, you need an extra battery and a square pulse generator. Batteries can be purchased at local stores or online in China (aliexpress).

This style of transformer has got quite complicated magnetic flows when it is operating, although the diagram above only shows some of the flow paths generated when the input coil “Coil 1” is pulsed. The really interesting result is seen when that input pulse cuts off and we expect return magnetic flow from coil 2 and coil 3. What happens is this:

Assume that coil 2 and coil 3 are identical. The reverse magnetic flux coming out of coil 2 immediately encounters a junction with one path being far easier to use than the other. As a result, the vast majority of that magnetic flow follows the broad path, and only a small percentage flows through the narrow path. The broad path flow meets and is opposed by an identical large flow coming from coil 3, and those flows effectively cancel each other out. This produces a major improvement over an ordinary transformer. But, the small flow reaching the entrance to Coil 1 encounters two identical paths, and only one of those paths goes to coil 1, so the flux divides with half going towards coil 3 and half going through coil 1. That halves the strength of the already small percentage of the original, unwanted reverse magnetic flow into coil 1. The other half runs into the reduced flow from coil 3 and those halves cancel each other out. The overall effect is a really major improvement in the performance of the transformer as a whole.

High Power Immobilizer Generator:

This is a self-powered version for electrical engineers. The self-installation of the self-accumulating square pulse generator circuit is simple. So there is no mention of this in the drawing. See drawings of self-powered free energy transformers:

See more details about this generator: Free Energy Transformer

Two types of self-powered generators and blueprints

Above, I took the example of a generator that is self-powered but belongs to the category of "immovable generators". In fact, generators with alternating current with gasoline fuel are still said to convert kinetic energy to electricity can also be converted into self-powered generators. Then we can classify into 2 types of self-powered generators

Type 1: Self-powered generator without movement

Self-powered, immobile generators come in many varieties. Therefore, it is necessary to introduce another type of self-powered generator - immobile - transformer type. 

In July 2013, two Brazilian men, Nilson Barbosa and Cleriston Leal, published a series of patents which appear to be very significant. Their patent WO 2013/104042 published on 18th July 2013, is entitled “Electromagnetic device for Capturing Electrons from the Ground to Generate Electricity” and has some very interesting features. It describes a simple device which they describe as an “electron trap”. Their patents are written in Portuguese and an attempted translation of three of them is included at the end of the Appendix.

An unusual feature of this design is the fact that it has a continuous conductive loop, in which it is claimed, current flows continuously, even without the need for an applied voltage. Instead, it is the magnetic fields of electromagnets which keep the current flowing. They state that an insignificant amount of input power produces a substantial power output, and they consider a COP of 100 to be about the minimum performance which can be expected from the design. That is a 1 watt input for a 100 watt output. One version of the electron trap looks like this:

The inventors describe their device like this: “this electromagnetic-field-generating device, powered by a power source, produces an electromagnetic field which induces an electric current in a closed conductive circuit, creating an interaction between the magnetic poles of the equipment and the magnetic poles of the earth - through both electromagnetic attraction and repulsion. An endless supply of electrons is drawn from the earth into the conductive closed loop, which is connected to the ground through a conductive interconnected grid. The attracted electrons add to the current already flowing in the conductive closed loop, making power available for driving high-power loads, although the device itself is supplied with only a small amount of power.”

One very interesting feature is that the continuous-loop coil formed by wire 4 in the diagram above, is literally, only two turns of wire. The power-gaining mechanism, amazingly, is the earth wire (shown in blue) which is merely wrapped around wire 4 and not directly connected to it as the electron-transfer link is by induction. With this arrangement, the current circulating in the closed loop wire 4, attracts more electrons from the ground, flowing through the wrapped connection of wire 5, into wire 4, augmenting the current flow there by a major amount. Wire 3 can have an alternating voltage applied to it in order to get alternating current in wire 4, but please understand that the current flowing in wire 4 is not the result of the current in wire 3. If the current in wire 3 is DC, then the current in wire 4 will be DC as this is not a conventional transformer, but instead, it is an electron trap, operating in an entirely different way.

The electron trap can be connected in an AC circuit of this type:

Here, the earth wire 5 is wrapped around the continuous loop wire 4, feeding it additional electrons captured from the ground. The ends of wire 4 are connected together to form the loop, and that connection also forms the positive side of the output (where a DC output is being produced). The magnetic field produced by the current flowing in wire 3, acts on the electron flow coming from the earth, but as it does not provide any of the electric power flowing in wire loop 4, the current flowing in wire 3 can be tiny, without affecting the power output.

In their patent WO 2013/104043, also of 18th July 2013, they show several different ways of connecting their electron trap in a useful circuit. For example, like this:

Here, the battery 13, is used to power an ordinary inverter 12, which produces a high alternating voltage, in this case, at very low power. That voltage is applied to the wire 3.1 to 3.2 of the electron trap, creating an oscillating magnetic field, which creates an oscillating inflow of electrons into the closed loop wire (4), which creates an amplified electrical output at the same frequency – typically 50 Hz or 60 Hz as those are the common mains frequencies. That amplified power output from the electron trap 14, is passed along wire 18 to an ordinary diode bridge 10, and the pulsing DC from the bridge is smoothed and used to replace the battery input to inverter 12. The battery is now switched out of the circuit and, as well as making the overall circuit self-powered, the power coming from the electron trap is used to recharge the battery if it needs recharging (and/or, perhaps, to charge the batteries of an electric car). Because the electron trap needs almost no input power at all, the input power to the inverter is very small, and so a good deal of additional AC power can be drawn off through cable 17, and used to drive powerful electrical loads, with no electrical power being needed from the battery. Being self-powered, the COP value for the circuit is infinity.

Just as there are several different ways of using an electron trap in a circuit, there are several ways of constructing and connecting an electron trap. While it is possible to arrange the components so that the power output is 2-phase or 3-phase, here we will just deal with the ordinary, household, single-phase power supply.

The first variation is to use more than one frame. Two frames can be connected like this:

This is the actual drawing from the patent and it presents a slight problem in that it is not physically possible to implement the number 4 wire in the way shown. Each frame will have two complete turns wound on it, although the drawing does not show this. Because of the inaccuracy of the drawing, I am not able to say if the coil turns on frame 2, are in the same direction as those on frame 1. There are four possible ways of winding these 2-turn coils when interconnecting them, so perhaps experimentation can be used to determine which method works best.

With this two-frame arrangement, there is just the one earth wire 5, as before, again, it is wrapped around wire 4 rather than being physically connected to it. The continuous wire loop 4 has two ends as before, but there are now two 3.1 wire ends and two 3.2 wire ends. The Portuguese translation programs produce highly questionable results for this area of the patent, but I gather that the inventors intend the two 3.1 ends to be connected together and the two 3.2 ends to be connected together, and then the joined ends are treated exactly as before, effectively putting the two windings in parallel.

One disadvantage of this design is that it is not portable due to the earth connection. Barbosa and Leal deal with this problem in their patent WO 2013/104041 of the same date where they show a method of constructing an electron trap which collects excess electrons from the air. If you feel that there are no excess electrons in the air, then consider the fact that all of the aerial designs in chapter seven all extract and use those electrons. Also, consider the amount of electricity in a lightning strike, where much of the electrical energy comes from the air, and remember that world wide, there are between 100 and 200 lightning strikes every second.

The free-electrons-in-the-air electron trap is somewhat more complicated than the earth-wire electron trap, with four pairs of coils (3 and 4) being mounted inside two aluminium hemispheres (1):

The methods for using the air-electrons trap are the same as those for the earth-wire electron trap. An earth-wire video demonstration is here: here with 22 watts producing 6 kilowatts. To further research this invention, try the extensive information available via here.

Type 2: Self-powered generator with motion

To be precise, American and Chinese AC generators are now self-powered. That means they are selling us free energy.

If the voltage generated at the windings on the stator of the generator goes back to the induction motor, to continue to produce rotation, this is also a self-powered generator.

The connection has many different methods. Nikola Tesla's way of connecting is the first version and demonstrates the essence of Ether twists. That is, the induction motor and the AC generator are actually the place for the manifestation of the Ether. Generators do not generate electricity, but only a place to express energy. See more: How Does Generator Work

The system of connected generators and induction motors is self-powered, to create a self-sustaining Generator as shown below:

Blueprint for creating a self-powered generator:

✔ The Real Nature of Tesla AC Generator 

Generates Energy-On-Demand: Easy Power Plan Will Change Our World Forever

✔ Combination of induction motor and alternator 
✔ Combine generators with induction motors - self-powered generators with rotary motion
✔ Various methods of generating high power immobile generators
✔ Or maybe called Overunity for the system. Mother Nature doesn't care about people calling or naming phenomena. Overunity or Free Energy, or Zero Point Energy (ZPE) are just a few different words